background

Gas Treating

PROCESS FEATURES
CONSER offers technology for the complete design (Basic Process Book) of gas treating units. Projects are supported by the know how and experience of CONSER alone or in collaboration with selected partners.
In addition to the design of new units, typical gas treating projects carried-out by CONSER include the following:
• Selection of the most appropriate solvent depending on specific application (MEA, DEA, MDEA, DGA, UCARSOL, GAS SPEC)
• Troubleshooting (corrosion, foaming)
• Debottlenecking towards increased capacity and energy savings
• Drying and purification for petrochemical applications

REFERENCES

Number of Projects 28
Number of Units 21

 

FLOWSHEET

GAS TREATING AMINE WASHING C162 R

 

PROCESS DESCRIPTION (Amine washing)

Sour gas is washed by counter-current contact with lean solvent to absorb H2S and CO2. Clean gas is discharged overhead, while rich solvent is flashed to minimize HC content. Rich solvent is preheated and fed to regeneration column where acid gas is stripped out and discharged to a Claus unit for sulphur recovery. Lean solution from the bottom of regenerator is cooled, filtered and recycled back to the absorber.


CASE HISTORY

Project type New Unit New Unit
Capacity, T/d H2S 260 120
H.P. Absorbers 3 -
L.P. Absorbers 2 1
Regenerator Diam, mm 2800  1800
Sol.n Circ. Rate, mc/h 240 100


P.le Ezio Tarantelli, 100
00144 Rome - Italy

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Tel. (+39) 06 5262001
Fax (+39) 06 5205249

CF e n° reg. imp.: 00875210585
partita iva: 00938941002 
capitale sociale: € 130.800,00 i.v.
rea: 327729 trib. RM 318/70

 - Term of Use -